Gamdias Apollo E2 Elite Tempered Glass RGB Mid-Tower Chassis Price in Pakistan
Blow Your Mind
Dual built-in 200mm ARGB LED fans in the front panel not only bring a sensational visual feast, also generate high air flow through the case. Astonish in the cool world that APOLLO E2 Elite has made.
“One Press and Sync All”
Handy I/O port on the top of the case featuring a ARGB fans control button, allowing you to cycle through all the lighting effects by simply pressing a button. A 3-sec hold of the button will sync the fans to your RGB motherboard 5v 3-pin. A high-speed USB 3.0, two USB 2.0 ports, a HD audio jack and a power button can also be found on the I/O port.
Magnetic Dust Filter
A magnetically held dust filter, located on top of the APOLLO E2 Elite to minimize dust entering the case. The magnets holding the dust filter in place, makes it easy to remove and clean the washable dust filter.
Out of the Ordinary
The APOLLO E2 Elite comes with a single side magnetic closing tempered glass swinging door. Not only showcasing all the components, also makes modding easier and more convenient.
The accommodation inside APOLLO E2 Elite is able to support up to six 120mm fans. Mounting points for 280mm, 240mm radiators at the top and additional 360mm at front, 140mm or 120 mm radiator in the rear.
The APOLLO E2 Elite’s internal volume is 15% larger than it’s predecessor, capable of supporting high-end CPU coolers, VGA cards up to 340mm and PSU up to 180mm long. An additional 3 Slot Vertical VGA Slot is also now available.
|HDD cage||“2 x 3.5″” or 1 x 2.5″”+1 x 3.5″”|
APOLLO E2 ELITE OVERVIEW
“Elite Lighting Performance”
The APOLLO E2 Elite inherits the same front dual 200mm ARGB Trio ring fans and with the new added swinging tempered glass side panel is out to impress. Superfluous air flow from the giant front fans delivers the cooling performance needed for the most powerful gaming setups.
|Product Name||APOLLO E2 Elite|
|Case Type||MID Tower|
|Motherboard Support||mini-ITX, microATX, ATX|
|Synchronization||5V (3pin) with ASUS / MSI /ASROCK / GIGABYTE motherboard|
|Material||SPCC & ABS & Tempered glass|
|Radiator Support||Top:280 mm, 240mm
Front:360 mm, 280mm
Rear:140 mm, 120mm
|Fan Support||Top: 2 x 120mm , 2 x 140mm
Front: 3 x 120mm , 2 x 140mm，2 x200mm
Rear: 1 x 120mm , 1 x 140mm
|Pre-installed Fans||Front: 2 x 200mm ARGB Fans
Rear: 1 x 120mm Fan
|Drive Bays||2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage)
3 x 2.5″
|I/O Port||USB 3.0 x1, USB 2.0 x2, HD Audio x1, LED Control x1|
|Clearance||CPU cooler height limitation: 190mm
VGA length limitation: 340mm
PSU length limitation: 180mm
|Dimension(LxWxH)||392 x230 x 467 mm|